eTrack Rail Lifting Clamp

 

How Does it Work?

The eTrack rail lifting clamp approaches, orients and positions itself directly on
the rail thanks to the finger. Once in position, the crane descends,
the spring loaded finger retracts and allows the clamp to make contact with the rail.

The eTrack clamp has been tested on the following rails:
45E2, 49E1, 50E3, 54E1, 54E3, 56E1, 60E1, 60E2 rail profiles and 75 conductor rails.

The eTrack is likely to be compatible with the following references but must depend on real tests:
49E1A2, 60E1A1 and 60E1A5.

 

In Detail

rail lifting system

 

LED Status Indicator

The eTrack’s LED Status Indicator is another feature that helps minimise risks and
enhance safety
in the lifting, transporting and turning of rail profiles. The colour coded
scheme shows the rail lifting clamps’ status at all times, and is visible from the operator’s position.

Green: Clamp is Unlocked / Release Load
Red: Intermediate: Do Not Lift!
Blue: Clamp is Locked / Lift & Manoeuvre Load
White: Low Battery

 

rail lifting tools

Efficient Battery

The 14 segment E-ink charge status display of the rechargeable li-ion battery for the
eTrack rail lifting clamp guarantees its optimal autonomy and minimum consumption.

The slot cover is also protected with a safety lock which
protects the battery from falling in case of impact.

 

eTrack clamp battery

Smart Nap

The “Smart Nap” mode reduces battery consumption by
activating the color code scheme of the LED status indicator
when the eTrack lifting clamp initiates its locking movement.
Until then, the rail clamp is in suspension mode
and its electronics and battery are not active.

A simple 3 hour charge allows for more
than 5.000 cycles or over 2 months in standby mode.

clamp

Autoclose Mode

When the eTrack’s sensor makes contact with the surface of the rail, the clamping
mechanism automatically unlocks. When the ascending maneuver begins, tension is applied
to the clamping mechanism which automatically locks onto the rail, allowing to raise the load.

The eTrack provides a reliable and fail-safe grip on the rail, and has a narrow profile
to ease the approach and positioning to an individual rail when rails are side by side.

eTrack Autoclose Mode

Check it Out!

Finger

The eTrack has a retractable spring loaded finger that serves as a guide
to orient and center the correct positioning of the rail clamp.

 

clamps for rail sections

Fail-safe

Thanks to its fail-safe design, and like
the rest of our smart lifting solutions,
once the rail lifting clamp has locked the rail, it is not
possible to release or drop the load that is being lifted.

 

fail-safe designed eTrack rail lifting clamp

Remote Controls

The eTrack rail lifting clamp can be paired to the eMAX remote control,
the eMINI remote control or the eINST installable remote control.

Send all the necessary orders and receive all the info from
the rail lifting clamps straight to your preferred remote control.

 

eTrack rail lifting clamp with remote control

See the eTrack Rail Lifting Clamps in Action!

Regulatory Standards

The eTrack rail lifting clamp certifies with the following regulatory standards:

EN 10204 3.1.B ETSI EN 303 446-2 V1.1.0 UNE-EN 60730-1:2013
ETSI EN 300 220-1 V3.1.1 UNE-EN 1050 UNE-EN 61000-6-4:2007
ETSI EN 300 220-2 V3.1.1 UNE-EN 13135:2013 UNE-EN 61000-6-2:2006
ETSI EN 303 446-1 V1.1.0 UNE-EN 60204-1:2007 UNE-EN ISO12100:2012

Directive on Machine Safety (D2006/42/EC).

EMC Directive (2014/30/EU).

Low Voltage Directive (2014/35/EU).

Radio Equipment Directive (2014/53/EU).

Assurance of Production Quality in accordance with ISO9001.

ARIB Construction Design Certification Number 203-JN0689.

FCC Identifier 2ACLHEVO for Equipment Class: Digital Transmission System.

Each mechanism is delivered with the CE stamp and a declaration of CE conformity.

elebia is a member of F.E.M. (European Federation of Materials Handling).

“eTrack

Quick Links

 

Configurator

Rail Lifting Clamp

Personalize and
configure your eTrack
rail lifting clamp.

Configure eTrack

Schedule a Demo

Rail Lifting Clamp

Want to see in person how your
company can benefit by using
the eTrack rail lifting clamp?

Schedule a Demo

User Manual

Rail Lifting Clamp

All the info you need and
more, of the eTrack
rail lifting clamp.

User Manual

Quote

Rail Lifting Clamp

Receive a quote for your
eTrack rail clamp or any
other product and accessory.

Quote

 

Quick FAQ’s

How do the eTrack rail lifting clamps work?
The eTrack rail lifting clamp carries a spring-loaded finger that serves as a guide to orient and center the correct positioning of the rail clamp.
What safety features does the eTrack rail clamp carry?
Besides the fact that it is fail-safe designed , therefore it is impossible to drop a suspended load, the eTrack carries a LED Status Indicator and also features an Autoclose Mode.
Can you use the eTrack rail lifting clamp on any type of rail?
The eTrack clamp has been tested on the following rails: 56E1, 60E2 rail profiles and 75 conductor rails.

Contact Us

Elebia Autohooks S.L.U.

Plaça Pere Llauger Prim, Naus 10-11

Polígon Industrial Can Misser

08360 Canet de Mar

(Barcelona) Spain

(+34) 93 543 4706