Remote Load Drop Hook

The D10 is a 10 Tonne automatic drop test hook that allows you to drop any load safely and at a distance with the use of the remote control.
No need to climb, use of ropes or cables to drop the load. Release the load effortlessly. from a safe distance.

Experience the convenience of our automate quick drop system, making your workflow seamless and secure

See the Remote Drop Test Hook in action


How does it Work our Drop Test Release Hook?

*Before operating D10 ensure the load transfer and release area is clear of personnel and equipment that could be affected in the event of load release.

More Info

In Detail our Quick Release Drop Tester

10 Tonne Load Drop Hook
The Minimum Releasable Weight is 20 kgs/44 lbs.*

(For lower values, please contact the sales department.)

High-Brightness LED
Status Indicator

The color of the LEDs indicates the state of the hook.

Green: D10 is Open / Unlocked
Red: Transitioning: Do Not Lift!
Blue: D10 is Closed / locked
White: Low Battery

LEDs for Automatic Load Drop Hook

Load Cell

(Coming soon)

The D10 can be equipped with a load cell for precise load measurements during the lifting process.

Our load cells provide quick and accurate readings, offering affordability and a longer lifespan compared to other sensors. Primarily used for weighing and preventing overloads, the load cell, when combined with the remote control, transforms our automatic drop test hook into a sophisticated and precise weighing scale with advanced features.


Load Cell for Automatic Load Drop Hook

More Info about the Load Cell


Nominal Load (Ln) 10t
Accuracy Class 0.5%
Minimum dead load 0% Ln
Service load 150% Ln
Ultimate load limit >400% Ln
Total error < ±0.5 % Ln
Repeatability error < ±0.2% Ln
Temperature effect on zero  < ±0.2% Ln/ 5ºC
Temperature effect on sensitivity  < ±0.2% Ln/ 5ºC
Creep error (30 min) < ±0.1% Sn
Temperature compensation -20 to +60 ºC
Storage temperature – 40 to +95ºC
Service temperature limits  -20 to +90 ºC
Excitation voltage 3…15 V
Imput impedance 400 ±30 Ohm
Environmental Protection IP66
Material Stainless steel
Cable gland + Shielded cable 4 wires 5M

High-Capacity Battery

With the high-capacity battery, a simple 3 hour charge allows for
a full day of productivity.

The battery remains protected from accidental impacts as the slot cover is protected
with a safety lock which protects the battery from falling in case of impact.

Automatic Load Drop Hook Battery


Dual Remote Controlled Release

The Elebia Drop Test Release Hook is designed for use with a dual remote control system.

Automatic Load Drop Hook Remote Control

We have chosen to implement a dual remote control setup, employing two emini remotes to enhance error mitigation.

Utilizing distinct frequencies for each remote adds an additional layer of security, making it more challenging for potential hackers to intercept and decipher the signals.

The likelihood of inadvertent order transmission is greatly reduced, given the necessity for precise button sequences on each remote within predefined time parameters.

For optimal operation, it is recommended to assign two separate workers to independently operate each remote.



Our quick release drop tester is supplied with a shackle. The Green Pin® Bow Shackle BN is a bow shackle with a safety bolt. The shackle offers a double safety (split pin and safety bolt) which prevents accidental unscrewing of the pin.

Material bow and pin high tensile steel, Grade 6, quenched and tempered
Safety Factor MBL equals 6 x WLL
Finish hot dipped galvanized
Temp. Range -40°C up to +200°C
Diameter Pin 35mm. / 1.37in.
Certification 2.1 / 2.2 / 3.1 / MTCa / ABS PDA / ABS MA /
DNV 2.7-1a / DNV 2.7-1b / DNVGL-ST-0378 / CE
Standard N 13889 and meets performance requirements of
US Fed. Spec. RR-C-271, Type IVA, Class 3, Grade A.
From 2 t and upward these shackles comply with ASME B30.26
elebia Dropper

Regulatory Standards Automatic Load Drop Hook Regulatory Standards

Elebia’s D10 certifies with the following regulatory standards:

EN ISO12100:2012 EN 61000-6-4:2002
EN 61000-6-2:2002 EN 60204-1:2007

Directive on Machine Safety (D2006/42/EC).

EMC Directive (2014/30/EU).

Low Voltage Directive (2014/35/EU).

Radio Equipment Directive (2014/53/EU).

Assurance of Production Quality in accordance with ISO9001.

ARIB Construction Design Certification Number 203-JN0689.

FCC Identifier 2ACLHEVO for Equipment Class: Digital Transmission System.

Each mechanism is delivered with the CE stamp and a declaration of CE conformity.

elebia is a member of F.E.M. (European Federation of Materials Handling).


elebia Dropper

Quick Links for our Quick release hook drop test



Personalize and configure
your D10 remote
load drop hook.

Configure D10

Schedule a Demo


See in person how your company
can benefit by using the
D10 load drop hook.

Schedule a Demo

User Manual

All the info you need and
more, of the D10
remote Load Drop Hook.

User Manual


Receive a quote for your
D10 Load Drop Hook or
any other product and accessory.



Contact Us

Elebia Autohooks S.L.U.

Plaça Pere Llauger Prim, Naus 10-11

Polígon Industrial Can Misser

08360 Canet de Mar

(Barcelona) Spain

(+34) 93 543 4706

    Enter your full name

    Enter a valid email

    Enter your phone

    Please, insert your company

    Please, select the country where you from

    Select an option

    Enter a brief message