e2 Battery

crane hook ink battery

Technical Specifications:

The battery status is indicated by a 14 segment Eink display.
The battery is fully charged when the 14 Eink segments are black, and as the battery discharges the segments turn white. The battery is completely discharged when all 14 Eink segments are white.
With the new Eink charge status display system and new electronics, autonomy and consumption are optimized.
Save battery when the automatic hook is not in use.
High capacity: 3 hour charge – 5.000 cycles / 250 hours in standby mode.

 

e2 220v Charger

hook battery charger

Technical Specifications:

Input Voltage: 100-240 V AC / 50-60Hz. 1.0A (max.)
Output: 12.6 V DC / 1.2A
Charge Indicator: No
Charge Complete Indicator: No

 

Multiple Charger

multiple charger

Technical specifications:

Input Voltage: 100-240 V AC / 50-60Hz. 0.15A (max.)
Charge Indicator: Yes, by red LED
Charge Complete Indicator: Yes, by green LED
Dimensions: 655 x 305 x 230 mm

e5 to e25 Battery

e5 hook battery

Technical Specifications:

No connectors. No wires. No cover. Push to insert. Pull to remove. Simple.
Lock system to prevent the battery from falling in case of impact.
ON/OFF button.
Ergonomic rubber handle to pull and carry the battery.
You’ll always know the level of the battery thanks to the 4 high brightness LEDs.
Save battery when the automatic hook is not in use.
High capacity: 3 hour charge – 5.000 cycles / 250 hours in standby mode.

 

e5 to e25 220v Charger

220v evo5-25 crane hook charger

Technical Specifications:

Input Voltage: 100-240 V AC / 50-60Hz. 0.15A (max.)
Output: 25.2 V DC / 1A
Charge indicator: Yes, by red LED
Charge complete indicator: Yes, by green LED

 

24V Charger

e5-e25 24v crane hook charger

 

A 24V Charger is also available.
The 24V charger should only be used in vehicles with a 24 volt connector.